Canon imagePRESS C1+ Reference Manual page 344

IMPORTANT
• To prevent other users from accidentally erasing all the data on the hard disk, it is recommended to
register a System Manager ID and System Password so that only the System Manager can perform this
procedure.
• Confirm that there are no current jobs being processed before using the Initialize All Data/Settings
mode.
• Make sure to back up necessary data before you erase the data. For information on the data that can be
backed up, see "Backing Up Data," on p. 1-10.
• You cannot access the machine while the hard disk is being initialized.
• The Initialize All Data/Settings mode does not delete any data the machine has stored on a server or
computer.
1
2
6
3
6-60
Initializing All Data/Settings
➞ [System Settings] ➞ [Initialize All Data/Settings].
Press
Press [Yes].
It may take more than 30 minutes to initialize the hard disk.
IMPORTANT
If there are any current jobs being processed, they will be cancelled, and then erased.
After the hard disk is initialized, press the main power switch to the
" " side.
IMPORTANT
After the hard disk is initialized, and if the printed colors are different from the colors printed
before the hard disk was initialized, select [Full Adjust] in Automatic Gradation Adjustment in
Adjustment/Cleaning (from the Additional Functions screen). For more information, see
"Automatic Gradation Adjustment," on p. 4-72.