Canon imagePRESS C1+ Reference Manual page 151

IMPORTANT
• The Saddle Stitch mode is available only if the Saddle Finisher-AA2 is attached.
• The maximum number of sheets that can be saddle stitched is as follows:
2
- 15 sheets (64 to 80 g/m
- 10 sheets (81 to 105 g/m
- When using coated paper:
5 sheets (106 to 150 g/m
4 sheets (151 to 209 g/m
• The paper sizes that can be saddle stitched are: 305 mm x 457 mm, A3, or A4R.
• The accuracy of folds created in the Saddle Stitch mode may vary depending on the paper type and the
number of sheets.
• Make sure to adjust the Booklet Tray guide to match the size of the output paper before outputting
saddle stitched prints, as shown below.
305 mm x 457 mm or A3
• A paper jam may occur if the Booklet Tray guide is not adjusted to match the size of the output paper.
) including a cover page (64 to 256 g/m
2 ) including a cover page (64 to 256 g/m
2 ) including a cover page (106 to 256 g/m
2 ) including a cover page (106 to 256 g/m
Finisher-AA1/Saddle Finisher-AA2/Punch Unit-L1/N1/P1
2
)
2 )
2 )
2 )
A4R
3
3-21