USB Settings
This mode enables you to specify the USB settings.
NOTE
Changes are only effective after you restart the machine (the main power is turned OFF, and then back
ON). For instruction on restarting (turning the main power OFF, and then back ON) the machine, see
"Main Power and Control Panel Power," on p. 1-18.
Using a USB Device
Set Use USB Device to 'On' to connect a computer with the machine via the USB port.
1
Press
2
Select [On] or [Off] ➞ press [OK].
Using a USB Host
Set Use USB Host to 'On' to connect a host device with the machine via the USB port.
1
Press
2
Select [On] or [Off] ➞ press [OK].
➞ [System Settings] ➞ [USB Settings] ➞ [Use USB Device].
➞ [System Settings] ➞ [USB Settings] ➞ [Use USB Host].
6-41
USB Settings
6