❑
Enter the size of the paper using the numeric keys on the touch panel display.
❑
Press [X] ➞ enter a value.
❑
Press [Y] ➞ enter a value.
❑
Press [OK].
You can also select a size key ([S1] to [S5]) containing a stored paper size setting, instead of
entering values.
The display returns to the paper size selection screen.
NOTE
• To enter values in inches, press [Inch].
• For instructions on entering values in inches, see "Values in Inches," on p. 2-26.
• If you make a mistake when entering values, press [C] on the touch panel display
correct values.
• To select a registered paper size stored in a size key ([S1] to [S5]), you must store the irregular
paper size in the size key beforehand. For instructions on storing irregular paper sizes, see
"Irregular Paper Size Settings for the Stack Bypass," on p. 4-50.
❑
Press [Next].
Making Prints Using the Stack Bypass
2
➞
enter the
2-51