Checking/Printing the Communication Log
You can check and print the following information on the Communication log: Start time,
destination address, delivery result, end time, data content, and end code.
Checking the Communication Log
1
Press
➞ [Communication Log].
2
Check the communication logs ➞ press [Done].
NOTE
To view the detailed information of a communication log, select the log
Printing the Communication Log
NOTE
For details on the Device Information Communication Log, see "Device Information Communication Log
Report," on p. 9-5.
1
Press
➞ [Communication Log].
2
Press [Print List].
If you want to print the list automatically at a specified time, press [Report Settings].
● If you select [Report Settings]:
❑
Specify the desired print settings ➞ press [OK].
Auto Print
[On]:
[Off]:
➞ [System Settings] ➞ [Device Information Delivery Settings]
➞ [System Settings] ➞ [Device Information Delivery Settings]
The communication log is automatically printed when the number of send and
receive transmissions reaches 100.
The communication log is not printed automatically.
Specifying Device Information Delivery Settings
➞
press [Details].
6-57
6