Canon imagePRESS C1+ Reference Manual page 479

WARNING
Do not burn or throw used toner cartridges into open flames, as this may cause the toner
remaining inside the cartridges to ignite, resulting in burns or a fire.
CAUTION
• Keep toner out of the reach of small children. If toner is ingested, consult a physician
immediately.
• If toner gets onto your hands or clothing, wash it off immediately with cold water. Do not use
warm water as this may set the toner permanently, and you may not be able to remove the
toner stains.
IMPORTANT
• Use only toner cartridges intended for use with this machine. For more information on the toner
cartridge, see "Consumables," on p. 7-57.
• Do not replace toner cartridges until the message prompting you to do so appears.
• The colour of the toner to be replaced is shown on the touch panel display. When you replace two or
more toner cartridges, replace the toner cartridge that you want to supply in order of black, cyan,
magenta, yellow, and clear.
• If you continue copying or printing in black-and-white after cyan, magenta, yellow, or clear toner runs
out, do not remove the depleted toner cartridges from the machine.
• You can display an error message informing the user that the remaining toner is low. For instructions on
displaying the remaining toner error message, see "Displaying the Remaining Toner Error Message," on
p. 6-39. For instructions on erasing the remaining toner error message, see "Erasing the Remaining
Toner Error Message," on p. 4-62.
NOTE
• You can replace a toner cartridge while the machine is printing.
• Complete instructions on how to replace the toner cartridge can be accessed by pressing [Previous] or
[Next] on the touch panel display.
• If toner runs out during a print job, the remaining prints are made after you replace the toner cartridge.
• If black toner is left, you can continue copying and printing in black-and-white. However, if a job is
interrupted because cyan, magenta, yellow, or clear toner runs out, copying and printing in
black-and-white is only possible for functions other than the function being used for the interrupted job.
• After replacing toner cartridges, if printed colours are different from the colours printed before you
replaced the toner cartridges, perform an Automatic Gradation Adjustment in Common Settings (from
the Additional Functions screen). (See "Automatic Gradation Adjustment," on p. 4-72.)
Replacing the Toner Cartridge/Waste Toner Container
7
7-45