Output Tray Designation
You can designate the machine's output trays to be used for specific functions.
The output trays indicated by Tray A, B, and C vary according to the attached optional
equipment.
Options Attached
Optical finisher is not attached.
4
Finisher-AA1 or Saddle
NOTE
The same output tray can be designated for multiple functions.
1
4-40
Specifying Common Settings
Finisher-AA2
You can change the output tray indicated by Tray C by pressing
[Specify Tray C].
➞ [Common Settings] ➞ [Tray Designation].
Press
Tray A/B/C