Meap Settings; Use Http Server - Canon imagePRESS C1+ Reference Manual

MEAP Settings

You can print information about installed MEAP applications.

Use HTTP Server

Set Use HTTP to 'On' to access this machine from a Web browser, and utilize the installed
MEAP applications.
IMPORTANT
• To manage user information for the Local Device Authentication system of SSO-H or SSO, set Use
HTTP to 'On'.
• To change the SSO-H or SSO user authentication system to Domain Authentication, Domain
Authentication + Local Device Authentication, or Local Device Authentication, set Use HTTP to 'On'.
• To use the Remote UI, set Use HTTP to 'On'.
6
NOTE
• Set Use HTTP to 'On' if HTTP is required for MEAP functions and MEAP applications. To use HTTP for
functions other than MEAP (e.g., the Remote UI), set Use HTTP in Network Settings (from the
Additional Functions screen) to 'On'. (See Chapter 3, "Using a TCP/IP Network," in the Network Guide.)
• If you set Use HTTP in System Settings (from the Additional Functions screen) to 'On', the port number
for MEAP functions and MEAP applications is automatically set to '8000'.
1
2
● If you select [On]:
6-34

MEAP Settings

➞ [System Settings] ➞ [MEAP Settings] ➞ [Use HTTP].
Press
Select [On] or [Off].
Details of each item are shown below.
[On]: An HTTP server is used.
[Off]: An HTTP server is not used.
❑
Select [On] or [Off] for <Use SSL> ➞ press [OK].
Use SSL (Secure Sockets Layer)
[On]: SSL is used to communicate.
[Off]: SSL is not used to communicate.