Color Cast Correction - Canon imagePRESS C1+ Reference Manual

Color Cast Correction

You can remove the colour cast of each colour that occurs on a white background during
printing or copying.
IMPORTANT
[Color Cast Correction] is displayed only if the settings are made available by your local authorized
Canon dealer. Even if [Color Cast Correction] is displayed, do not allow anyone to change the settings
except for the system manager. For more information on changing the settings, contact your local
authorized Canon dealer.
1
Press

[Color Cast Correction].

2
Select the colour of which a colour cast occurs ➞ press [+] to adjust.
When you set a positive value ([+]), the colour cast will be removed, but the following problems
may occur.
- Colour fading occurs at the tail end of the output image.
- Glossy grains occur.
- Fine lines are printed more fine.
If you set to a negative value ([-]) when these problems occur, these may be improved.
IMPORTANT
If the colour cast is not removed even if you enter "+2" as the setting value, contact your local
authorized Canon dealer.
➞ [System Settings] ➞ [Device Management Settings] ➞
Device Management Settings
6
6-97