Printing Installed Application Information - Canon imagePRESS C1+ Reference Manual

● If you select [Off]:
❑
Press [OK].
NOTE
• Before setting <Use SSL> to 'On', it is necessary to set a default key in Network Settings (from
the Additional Functions screen). (See Chapter 3, "TCP/IP Network," in the Network Guide.)
• The Use HTTP mode is enabled only after you restart the machine (the main power is turned
OFF, and then back ON). For instruction on restarting (turning the main power OFF, and then
back ON) the machine, see "Main Power and Control Panel Power," on p. 1-18.
• Any changes made to <Use SSL> are also applied to <Use SSL> in Remote UI in System
Settings (from the Additional Functions screen).

Printing Installed Application Information

You can print the MEAP application information, as well as certain system application
information.
NOTE
The information is printed as a report.
1
Press
Information].
2
Press [Yes].
➞ [System Settings] ➞ [MEAP Settings] ➞ [Print System
6-35
MEAP Settings
6