Receiving Faxes Manually: Manual Mode; Setting Manual Mode; Receiving A Fax Manually - Canon MultiPASS C100 User Manual

Receiving Faxes Manually: MANUAL MODE

In MANUAL MODE, if you connect the optional handset or a telephone to your
MultiPASS, you can receive voice calls as well as manually activate reception of faxes.
You can activate reception from the MultiPASS or from the telephone connected to the
unit (this is called Remote receiving).
n
• For this mode, you need to connect the optional handset or a telephone to your unit.
(1 p. 2-6)
• Make sure the REMOTE RX setting is enabled (1 p. 14-7). You can also enable this
setting from the MultiPASS Suite. (1 MultiPASS Suite User's Guide)

Setting MANUAL MODE

Follow this procedure to set the receive mode to MANUAL MODE:
1
Press Receive Mode to select MANUAL
MODE.
• After a few seconds, the LCD changes to this
display:

Receiving a Fax Manually

Follow this procedure to receive a fax manually:
1
Make sure Manual is displayed in the LCD.
(1 above)
2
Make sure you have connected the optional
handset or a telephone to the MultiPASS.
(1 p. 2-6)
3
When you hear the optional handset or
telephone ring, pick up the handset.
8-8
Receiving Faxes
MANUAL MODE
Ex:
15:00 Manual
Ex:
15:00 Manual
Chapter 8