Canon imagePRESS C1+ Reference Manual page 150

IMPORTANT
• If the Staple mode is set, the output trays move downward as the stack of paper that is output increases
in quantity and thickness. Once an output tray has reached its stacking limit, or after 30 sets of prints
have been output, printing and stapling stop temporarily. Remove all of the stapled prints from the
output tray, and printing and stapling resume.
• You can corner and double staple A3, A4, and A4R paper.
• You cannot staple transparencies or labels.
• Do not pull copies or prints out of the output area while they are being stapled. Remove the copies or
prints after they are output to one of the output trays.
NOTE
• The maximum number of sheets, including cover sheets, that can be stapled together is as follows:
- A4
3
50 sheets (64 to 81.4 g/m
30 sheets (81.5 to 105 g/m
2 sheets (106 to 256 g/m
- A3, A4R
30 sheets (64 to 81.4 g/m
20 sheets (81.5 to 105 g/m
2 sheets (106 to 256 g/m
• If the machine stops while stapling and the message <Load staples.> appears, almost all of the staples
have been used, and the staple cartridge must be replaced. To proceed, replace the staple cartridge.
(See "Replacing the Staple Cartridge in the Stapler Unit," on p. 7-32.)
■ Saddle Stitch Mode
The Saddle Stitch mode enables you to make booklets, consisting of pages folded and stapled in the
centre.
3-20
Finisher-AA1/Saddle Finisher-AA2/Punch Unit-L1/N1/P1
2 )
2 )
2
)
2
)
2
)
2
)
Originals
1
2
3
4
5
6
7
8
Copy
8 1
6 3
The pages are folded
and stapled in the centre to
form a booklet.