Procedure After Using The Machine; Department Id Management; Flow Of Additional Functions Operations - Canon imagePRESS C1+ Reference Manual

Procedure after Using the Machine

1
3

Department ID Management

This section describes how to change the password and page limit, and how to check the print
totals when the control card is being used.
NOTE
The maximum number of digits that you can register for the password is seven. If you enter fewer than
seven digits, the machine registers the password with leading zeros.
- Example: If <321> is entered, then <0000321> is registered.

Flow of Additional Functions Operations

This section describes the flow of Additional Functions operations when the optional Card
Reader-C1 is attached.
NOTE
Settings specified from the Additional Functions screen are never changed when you press
3-26
Card Reader-C1
After you finish using the machine, remove the control card.
The touch panel display returns to the screen for inserting the control card.
IMPORTANT
Once you have removed the control card, you cannot operate the machine until the control card
is inserted again.
.