Finishing Modes - Canon imagePRESS C1+ Reference Manual

Finishing Modes

The Finisher-AA1 and Saddle Finisher-AA2 are equipped with the following finishing modes.
CAUTION
• Do not place anything other than output paper in the trays of the finisher, as doing so may
damage the trays.
• Do not place anything under the trays of the finisher, as doing so may damage the trays.
NOTE
If the Collate or Group mode is set, the output trays move downward as the stack of paper that is output
increases in quantity and thickness. Once an output tray has reached its stacking limit, subsequent
prints are automatically delivered to the next available tray. If all of the available trays have reached their
stacking limits, printing stops temporarily. Remove all of the output paper from the trays. The trays move
upward, and printing resumes.
■ Collate Mode
The prints are automatically collated into sets arranged in page order. The collated print sets can be
shifted by pressing [Offset].
■ Group Mode
All prints of the same original page are grouped together. The grouped print sets can be shifted by
pressing [Offset].
Finisher-AA1/Saddle Finisher-AA2/Punch Unit-L1/N1/P1
3
3-17