Checking Copy/Print Job Details From The Print Job Screen - Canon imagePRESS C1+ Reference Manual

2
5
3

Checking Copy/Print Job Details from the Print Job Screen

1
5-14
Job Details
IMPORTANT
To check the details of jobs specified through a MEAP application, select [Print] for both MEAP
copy and print jobs.
Press [Status] or [Log] ➞ select the job whose details you want to
check ➞ press [Details].
Check the detailed information ➞ press [Done] repeatedly until the
Basic Features screen appears.
NOTE
If Suspended Job Timeout is set to 'On', and the designated time elapses for a job suspended
because the designated paper was not available when the job was issued, the job is displayed as
a suspended job.
- To display detailed information for a suspended job, such as the designated paper, select the
➞
job press [Details].
- To resume a suspended job, load the designated paper
➞
[Details] [Resume].
- You can select more than one suspended job to resume.
Press [Print Job].
If necessary, see the screen shot in step 1 of "Checking Job Status from the System Monitor
Screen," on p. 5-5.
➞
select the suspended job
➞
press