Canon imagePRESS C1+ Reference Manual page 463

17
Set the size sheet matching the size of the paper that you want to load.
IMPORTANT
• If you place the paper directly on the lifter without setting the deck base plate, the loaded paper
may hang over the lifter, and paper jams may occur.
• Never place the deck base plate in the empty part of the paper deck. Doing so may lead to a
malfunction of the copier.
• Load the size sheet and make sure to set the size change plate and rear edge retainer properly
before loading paper into the paper deck. If the size change plate and rear edge retainer are not
properly set, the paper deck may become damaged.
18
Load the paper stack into the paper deck, and then lower the feeding
support roller.
CAUTION
When loading paper into the paper deck, take care not to cut your hands on the edges
of the paper.
Paper Size Sheet
Paper Deck-AA1 (Optional)
7
7-29