Canon imagePRESS C1+ Reference Manual page 142

IMPORTANT
• When using the platen glass to copy or scan thick originals, such as books or magazines, do not press
down hard on the feeder.
• If the original output area is blocked, originals may get damaged, and printing may not be performed
correctly. Therefore, do not place any objects in the original output area.
• If the platen glass or original feeding belt is dirty, print quality may deteriorate. In this case, clean the
feeding belt and platen glass. (See "Platen Glass and Original Feeding Belt/Underside of the Feeder,"
on p. 7-53.)
a Feeder Cover
Open this cover when clearing a paper jam. (See "Screens
Indicating the Locations of Paper Jams," on p. 8-3.)
b Original Set Indicator
Lights when originals are placed in the original supply tray.
3
c Original Supply Tray
Originals placed here are automatically fed sheet by sheet
onto the platen glass. Place originals into this tray with the
surface that you want to scan face up.
3-12
Feeder (DADF-R1)
d SADF Tray
Single Automatic Document Feeder Tray. Place one original
at a time into the SADF tray when scanning heavy or
lightweight originals. Place originals into this tray with the
surface that you want to scan face down.
e Slide Guides
Adjust the slide guides to match the width of the original.