When Output Sheets Are Not Neatly Stacked In The Output Trays - Canon imagePRESS C1+ Reference Manual

When Output Sheets Are Not Neatly Stacked in
the Output Trays
Depending on the paper type, output paper sheets may not be stacked neatly in the output tray
because of the upward paper curl occurred during printing.
In this case, change the curl correction level.
Duplicate the registered paper type, and then change the level of curl correction to register it as
a custom paper type.
NOTE
You cannot change the settings of default paper types registered in the machine.
1
2
3
8
8-66

When Output Sheets Are Not Neatly Stacked in the Output Trays

➞ [System Settings] ➞ [Paper Type Management Settings].
Press
Select from the list a paper type whose curl correction level you want
to change ➞ press [Duplicate].
Enter a name ➞ press [OK].