Device Information Communication Log Report - Canon imagePRESS C1+ Reference Manual

Device Information Communication Log Report

The Device Information Communication Log Report contains information about device
information that has been delivered and received. You can select to print the Device Information
Communication Log Report manually or automatically.
You can also select to either print the Communication Log after the number of send and receive
transmissions reaches 100, or specify to print it at a specified time. For more information, see
"Checking/Printing the Communication Log," on p. 6-57.
27/08 2008 WED 13:58
START TIME
* 2 1 / 0 8 1 4 : 0 4
* 2 1 / 0 8 1 4 : 0 5
■ START TIME
Prints the date and time (in 24-hour notation) when device information communication started. (An
asterisk (*) indicates that a report has already been printed.)
■ END TIME
Prints the date and time (in 24-hour notation) when device information delivery/reception completed.
■ TYPE
Displays whether the device information was delivered or received.
■ TO/FROM
Prints the delivery destination if the device information was delivered.
Prints the delivery source if the device information was received.
■ CONTENT
Prints the device information that was delivered/received.
■ RESULT
Prints "OK" if the communication was completed successfully, or "NG" (No Good) if there was a
communication error.
If an error occurred during communication, the error code is also printed.
********************************************************************

DEVICE INFORMATION COMMUNICATION LOG REPORT

********************************************************************
********************************************************************
END TIME TYPE TO/FROM
2 1 / 0 8 1 4 : 0 4 DELIVER 1 1 1 . 1 1 . 1 1 1 . 1 1 1
2 1 / 0 8 1 4 : 0 6 DELIVER 2 2 2 . 2 2 . 2 2 2 . 2 2 2
iPR C1+
DATA CONTENT RESULT
ADD.FUNCTNS SET.VALUE NG
D E PT . I D NG
ADDRESS BOOK NG
Sample Reports
001
# 7 5 4
# 7 5 4
# 7 5 4
9
9-5