Receiving Faxes Manually: Manual Mode; Setting Manual Mode; Receiving A Fax Manually - Canon LASER CLASS 1060P User Manual

Receiving Faxes Manually: MANUAL MODE

Set this mode if you only have one telephone line that you use mainly for voice calls,
and only occasionally to receive faxes.
For this mode, you will need to connect the optional handset or a telephone to your unit
to be able to receive voice calls and also to manually activate reception of documents.
You can activate reception directly from your unit, or if your telephone is located away
from your unit, you can dial the remote receiving ID on the telephone to activate
reception (this is called Remote reception).

Setting MANUAL MODE

Follow this procedure to set the receive mode to MANUAL MODE:
1
Press Receive Mode repeatedly until
MANUAL MODE is displayed.
• After a few seconds, the LCD changes
to this display:

Receiving a Fax Manually

Follow this procedure to receive a fax manually:
1
Make sure Manual is displayed in the
LCD (1 above).
2
Make sure you have connected the
optional handset or a telephone to
your unit (1 p. 2-7).
3
When you hear the optional handset
or telephone ring, pick up the handset.
If you hear a long beep tone or silence:
4
Someone is trying to send you a fax.
Press Start/Copy on your unit and
hang up to begin receiving the
document.
• If you are using the telephone and it is
located away from your unit, dial 25 (the
default remote receiving ID) on your
telephone and hang up.
8-6
Receiving Faxes
MANUAL MODE
Ex:
12/27 Manual
Ex:
12/27 Manual
Chapter 8