Setting The Default Screen For Hold; Returning The Common Settings To Their Defaults - Canon imagePRESS C1+ Reference Manual

Setting the Default Screen for Hold

You can set the Hold screen that is displayed when the main power is turned ON or after the
Auto Clear Time mode activates.
NOTE
[Default Screen for Hold] is displayed only if the optional Color UFR II/PCL/PS Printer Kit is activated.
1
Press
2
Select [Single List Display] or [Double List Display] ➞ press [OK].

Returning the Common Settings to Their Defaults

You can restore all of the Common Settings to their defaults (initial settings).
NOTE
• If you set Language Switch to 'On', and then return the Common Settings to their default settings,
Language Switch is turned 'Off', but the language shown on the touch panel display remains
unchanged. (See "Changing the Language Shown on the Touch Panel Display," on p. 4-54.)
• If you set Limited Functions Mode to 'On', and then return the Common Settings to their default settings,
the setting for the Limited Functions Mode remains unchanged.
• Image forms registered for Register Form for Composition are not erased.
1
Press
2
Press [Yes].
➞ [Common Settings] ➞ [Default Screen for Hold].
➞ [Common Settings] ➞ [Initialize Common Settings].
Specifying Common Settings
4
4-65