Wire Cleaning
If streaks appear on printed output or random parts of the printed image are missing, clean the
corona assembly wires inside the main unit.
NOTE
• It takes approximately 35 seconds to clean the wires.
• Wire cleaning cannot be performed during printing.
1
Press
2
Press [Start].
When cleaning is complete, try printing again.
Roller Cleaning
If dirt or streaks appear on printed output, clean the roller inside of the main unit.
NOTE
It takes approximately one minute to clean the roller.
1
Press
2
Press [Start].
When cleaning is complete, try printing again.
➞ [Adjustment/Cleaning] ➞ [Wire Cleaning].
➞ [Adjustment/Cleaning] ➞ [Roller Cleaning].
Adjusting the Machine
4
4-83