Canon imagePRESS C1+ Reference Manual page 204

3
4
4-34
Specifying Common Settings
Select [On] or [Off] for the stack bypass and the other paper sources ➞
press [OK].
Details of each item are shown below.
[On]: The paper source is eligible for APS/ADS.
[Off]: The paper source is ineligible for APS/ADS.
The numbers on the screen represent the following paper sources:
The optional Feeder (DADF-R1), Saddle Finisher-AA2, Punch Unit-L1, and Paper Deck-AA1
are attached.
NOTE
• Regardless of the stack bypass setting, you cannot select 'Off' for all of the paper sources at the
same time. At least one of the paper sources, besides the stack bypass must be set to 'On'.
• The settings under [Copy] include an option called [Consider Paper Type], which determines
whether the machine considers the paper type loaded in a paper source.
- If [Consider Paper Type] is set to 'On', paper is not fed from another paper source when the
original paper source runs out of paper, unless another paper source is loaded with the same
paper size and type. For more information on stored paper types, see "Identifying the Type of
Paper in a Paper Source," on p. 4-35.
- If [Consider Paper Type] is set to 'Off', paper is fed from another paper source when paper in
the current paper source runs out, as long as the same paper size/type is loaded in that paper
source.
• If you selected [Printer] in step 2, the Stack Bypass icon ( ) will not be displayed on the paper
selection screen.
Stack Bypass
Paper Drawer 1
Paper Drawer 2
Paper Drawer 3
Paper Drawer 4
Paper Deck-AA1 (optional)