Canon imagePRESS C1+ Reference Manual page 211

2
Select the functions for which to designate output Trays A, B, and C ➞
press [OK].
The optional Saddle Finisher-AA2 is attached.
[Printer] appears only if the optional Color UFR II/PCL/PS Printer Kit or imagePRESS Server is
available for use.
[Other] is used for designating a tray for printing reports.
[Receive] appears only if the optional Color Universal Send Kit is activated.
If you want to use an output tray for only one function, select only that function.
IMPORTANT
If a certain tray reaches its stacking limit, the machine automatically uses another tray that is
designated for the same function. However, it is recommended that you only designate one tray
for I-fax documents to prevent them from getting lost.
NOTE
Changes are only effective after you restart the machine (the main power is turned OFF, and
then back ON). For instructions on restarting (turning the main power OFF, and then back ON)
the machine, see "Main Power and Control Panel Power," on p. 1-18.
● If you want to select the tray home position (when the optional Finisher-AA1 or
Saddle Finisher-AA2 is attached):
❑
Press the Tray Home Position drop-down list ➞ select the tray home position to be used
while jobs are being processed.
Tray Home Position
[Tray B]: Tray B moves closer to the output area.
[Tray C]: Tray C moves closer to the output area.
[Off]: The tray home position is not set. The output tray stops at the position it is in
when printing finishes.
Specifying Common Settings
4
4-41