Setting a Timeout for Suspended Jobs
You can set the suspension time for jobs that have been suspended because the designated
paper was not available when the job was issued. After the suspension time elapses, the
suspended jobs are automatically erased.
NOTE
If a job is suspended because paper has run out during the job, the next job is not processed even after
the designated suspension time elapses.
1
Press
2
Select [On] or [Off].
● If you select [On]:
❑
Press [-] or [+] to set the time until suspended jobs are automatically erased.
❑
Press [OK].
● If you select [Off]:
❑
Press [OK].
3
Press [Done].
➞ [Common Settings] ➞ [Suspended Job Timeout].
Specifying Common Settings
4
4-63