Canon imagePRESS C1+ Reference Manual page 458

9
7
7-24
Paper Deck-AA1 (Optional)
IMPORTANT
• Make sure to align the size change plate properly with the marks for the desired paper size.
There are two marks for paper size at the top of the paper deck. Align the size change plate with
the desired marks.
• Make sure that the size change plate is properly aligned with the marks for the desired paper
size. If the size change plate is not properly aligned, the paper deck may become damaged.
When you have finished aligning the outer size change plate with the
marks for the desired paper size, fix the outer size change plate with
the two blue screws using a coin or something similar, while slightly
holding its centre front portion and pressing it towards you.
Fasten the left blue screw before fastening the right blue screw.
IMPORTANT
If you fasten the blue screw without pressing the outer size change plate towards you, the plate
may be fixed at an angle. If you use the paper deck with a tilted outer size change plate, paper
may be fed as slanted, poor print quality may result, and paper jams may occur. Therefore, make
sure to fasten the blue screw while pressing the outer size change plate towards you.