Finishing Modes - Canon ImageRunner 2545i Reference Manual

Finishing Modes

The Inner Finisher-B1 is equipped with the finishing modes described below.
4
NOTE
• The output trays move downward as the stack of paper that is output increases in
quantity and thickness. Once the output trays have reached their stacking limit,
printing stops temporarily. Remove all of the prints from the output trays to resume
printing.
• For more information on the Finishing modes, see Chapter 2, "Basic Copying
Features," in the Copying Guide and Chapter 4, "Customizing Settings," in the Printer
Guide.
■ Collate Mode
The copies are automatically collated into sets arranged in page order.
4-14
Inner Finisher-B1
Three Copies
Originals
of Each Page
Collated in
Page Order
1
2
3
4
CAUTION
Do not place your hand in the
following parts of the finisher, as this
may result in personal injury:
- Trays
- Stapler unit (where stapling is
performed)
- Rollers
- Spaces between the trays and the
main unit
IMPORTANT
• Do not place anything other than output
paper in the trays of the finisher, as this
may damage the trays.
• Do not place anything under the trays
of the finisher, as this may damage the
trays.
Set 1 Set 2
1 1
2 2
3 3
4 4
Set 3
1
2
3
4