Configuring None Authentication For Console Login - H3C S5500-HI Series Fundamentals Configuration Manual

none—Requires no username and password at the next login through the console port. This mode
•
is insecure.
• password—Requires password authentication at the next login through the console port.
scheme—Requires username and password authentication at the next login through the console
•
port. Authentication falls into local authentication and remote authentication. To use local
authentication, configure a local user and related parameters. To use remote authentication,
configure the username and password on the remote authentication server. For more information
about authentication modes and parameters, see Security Configuration Guide.
The following table lists console port login configurations for different authentication modes:
Authentication
mode
None
Password
Scheme
NOTE:
A newly configured authentication mode does not take effect unless you exit and enter the CLI again.

Configuring none authentication for console login

Configuration prerequisites
You have logged in to the device.
Configuration
Configure not to authenticate users
Configure to authenticate users by using the local
password
Set the local password
Configure the authentication scheme
Remote AAA
authentication
Select an
authentication
scheme
Local
authentication
Configure a
RADIUS/HWTACA
CS scheme
Configure the AAA
scheme used by the
domain
Configure the
username and
password on the
AAA server
Configure the
authentication
username and
password
Configure the AAA
scheme used by the
domain as local
29
Remarks
For more information, see
"Configuring none
authentication for console
login."
For more information, see
"Configuring password
authentication for console
login."
For more information, see
"Configuring scheme
authentication for console
login."