Option Card Installation; Option Card Installation; Prior To Installing The Option - YASKAWA E1000 Technical Manual

8.4 Option Card Installation

8.4

Option Card Installation

This section provides instructions on installing the option cards listed in

◆ Prior to Installing the Option

Prior to installing the option, wire the drive, make the necessary connections to the drive terminals, and verify that the
drive functions normally.
Table 8.2 lists the number of option cards that can be connected to the drive and the drive connector for connecting those
option cards.
Option Card
SI-C3, SI-N3, SI-P3, SI-S3, SI-T3
Figure 8.2 shows an exploded view of the drive with the option and related components for reference.
Figure 8.2
N
M
L
K
A – Insertion point for CN5
B – Option card
C – Front cover
D – Digital operator
E – LED label
F – Terminal cover
G – Removable tabs for wire routing
<1> LED label varies depending on the option models.
336
Table 8.2 Option Card Installation
Connector
CN5-A
A
B
J
I
H
G
<1>
Figure 8.2 Drive Components with Option
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
Table 8.1.
Number of Cards Possible
C
ERR
BF
F
H – Included screws
I – Ground wire
J – CN5 communication connector
K – Drive grounding terminal (FE)
L – Connector CN5-A
M – Connector CN5-B
N – Connector CN5-C
1
Common_
TMonly
D
E
RUN
COMM