YASKAWA E1000 Technical Manual page 310

7.4 Cooling Fan and Circulation Fan
■
Installing the Cooling Fan
Reverse the procedure described above to reinstall the cooling fan.
1.
Install the replacement fan into the drive, ensuring the alignment pins line up as shown in the figure below.
Figure 7.15
2.
Make sure the power lines for the fan are properly connected, then place the power supply connectors and cable
back into the recess of the drive.
Figure 7.16
YEC_TMonly
3.
Angle the fan cover as shown and insert the connector tabs into the corresponding holes on the drive.
Figure 7.17
310
YEC_TM
only
Figure 7.15 Installing the Cooling Fan: 4A0088 and 4A0103
A – Back
Figure 7.16 Cooling Fan Power Supply Connectors: 4A0088 and 4A0103
Figure 7.17 Reattach the Fan Cover: 4A0088 and 4A0103
B – Front
Holes for connector tabs.
Fan cover
Four tabs
Hook
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
A
B
Back or Drive
YEC_
TMonly
Hook
Front of Drive