Preface; Applicable Documentation; Symbols; Terms And Abbreviations - YASKAWA E1000 Technical Manual

i.1 Preface
i.1

Preface

Yaskawa manufactures products used as components in a wide variety of industrial systems and equipment. The selection
and application of Yaskawa products remain the responsibility of the equipment manufacturer or end user. Yaskawa
accepts no responsibility for the way its products are incorporated into the final system design. Under no circumstances
should any Yaskawa product be incorporated into any product or design as the exclusive or sole safety control. Without
exception, all controls should be designed to detect faults dynamically and fail safely under all circumstances. All
systems or equipment designed to incorporate a product manufactured by Yaskawa must be supplied to the end user with
appropriate warnings and instructions as to the safe use and operation of that part. Any warnings provided by Yaskawa
must be promptly provided to the end user. Yaskawa offers an express warranty only as to the quality of its products in
conforming to standards and specifications published in the Yaskawa manual. NO OTHER WARRANTY, EXPRESS OR
IMPLIED, IS OFFERED. Yaskawa assumes no liability for any personal injury, property damage, losses, or claims
arising from misapplication of its products.
This manual is designed to ensure correct and suitable application of Variable E1000-Series Drives. Read this manual
before attempting to install, operate, maintain, or inspect a drive and keep it in a safe, convenient location for future
reference. Be sure you understand all precautions and safety information before attempting application.

◆ Applicable Documentation

The following manuals are available for E1000 series drives:
DIGITAL OPERATOR JVOP-182 ALM
REV DRV FOUT
LO
ESC
RE
RESET ENTER
RUN STOP
CIMR-EA2A0021FAA
200V 3Phase 5.5kW/3.7kW
S/N:
WARNING AVERTISSMENT NPJT31470-1
Risque de décharge électrique.
Risk of electric shock.
● Read manual before installing. ● Lire le manuel avant l'installation.
● Wait 5 minutes for capacitor Attendre 5 minutes après la coupure
discharge after disconnecting ● de l'alimentation, pour permettre
power supply. la décharge des condensateurs.
● To conform to requirements, ● Pour répondre aux exigences , s
make sure to ground the supply assurer que le neutre soit relié
neutral for 400V class. à la terre, pour la série 400V.
After opening the manual switch
● ● Après avoir déconnécte la protection
between the drive and motor, entre le driver et le moteur, veuillez
please wait 5 minutes before patienter 5 minutes avain d'effectuer
inspecting, performing une opération de montage ou de
maintenance or wiring the drive. câblage du variateur.
Hot surfaces Surfaces Chaudes
● Top and Side surfaces may Dessus et cotés du boitier Peuvent
become hot. Do not touch. ● devenir chaud. Ne Pas toucher.
危 険
けが．感電のおそれがあります。
● ● 据え付け、 運転の前には必ず取扱説明書を読むこと。
通電中および電源遮断後5分以内はフロントカバー
● ● を外さない事。
● ● 400V級インバータの場合は、電源の中性点が接地
されていることを確認すること。( 対応）
● 保守・点検、配線を行う場合は、出力側開閉器を
● 遮断後5分待って実施してください。
高温注意
● インバータ上部、両側面は高温になります。
● 触らないでください。

◆ Symbols

Note: Indicates a supplement or precaution that does not cause drive damage.
Indicates a term or definition used in this manual.
TERMS TERMS TERMS

◆ Terms and Abbreviations

• Drive: YASKAWA E1000 Series Drive
TERMS TERMS TERMS
• V/f: V/f Control
• OLV/PM: Open Loop Vector Control for PM
• PM motor: Permanent Magnet Synchronous motor (an abbreviation for IPM motor or SPM motor)
• IPM motor: Interior Permanent Magnet Motor (such as Yaskawa's SSR1 Series)
• SPM motor: Surface mounted Permanent Magnet Motor (such as Yaskawa's SMRA Series motors)
14
E1000 Series AC Drive Quick Start Guide
This guide is available only in Chinese.
It is packaged together with the product. It contains basic information required to install and wire the drive, in addition to an
overview of fault diagnostics, maintenance, and parameter settings. It is meant to get the drive ready for a trial run with the
application and for basic operation.
E1000 Series AC Drive Technical Manual (this book)
YEC_com
This manual is included on the CD-ROM packaged with the product (YASKAWA AC Drive Manuals, TOMCC71060013), and is
mon
also available for download on our documentation website, http://www.Yaskawa.com.cn. This manual provides detailed
information on parameter settings, drive functions, and MEMOBUS/Modbus specifications. Use this manual to expand drive
functionality and to take advantage of higher performance features.
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual