YASKAWA E1000 Technical Manual page 334

8.2 Drive Options and Peripheral Devices
Option
LCD Operator
Remote Operator Cable
USB Copy Unit
—
Attachment for External Heatsink
— Condenser Cover
—
NEMA 1 Kit
Installation Support Set A
Installation Support Set B
24 V Power Supply
—
DriveWizard Plus
—
DriveWorksEZ
PROFIBUS-DP
<1>
CC-Link
<1>
DeviceNet
<1>
CANopen
<1>
MECHATROLINK-II
<1> Under development
334
JVOP-180
WV001/WV003
JVOP-181
EZZ020800
ECAT31726-1, ECAT31698-1
EZZ021136
EZZ020642A
EZZ020642B
200 V class: PS-A10LB
400 V class: PS-A10HB
SI-P3
SI-C3
SI-N3
SI-S3
SI-T3
<1>
Model Number
Interface Options
Attachment
Others
—
—
Communication Options
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
Description
Digital operator with 8 languages, clear text LCD display, and
copy function; max. cable length for remote usage: 3 m
Extension cable (1 m or 3 m) to connect the digital operator for
remote operation
RJ-45, 8 pin straight through, UTP CAT5e cable
Allows the user to copy and verify parameter settings between
drives. Can also be used as an adapter to connect the drive to
the USB port on a PC.
Installation kit for mounting the drive with the heatsink outside
of the panel
This cover protects the DC bus capacitors when mounting the
heatsink outside the enclosure. It is required for UL approval.
For more information, contact our sales department directly or
your nearest Yaskawa representative.
Parts to make the drive conform to IP20/NEMA 1, UL Type 1
enclosure requirements
For installing the digital operator keypad on the outside of an
enclosure panel that houses the drive. Uses screws to secure the
operator.
For installing the digital operator keypad on the outside of an
enclosure panel that houses the drive.
Uses nuts to secure the operator for installations where screws
are not practical.
Provides power to the control circuit and option boards in the
event of power loss. Allows the user to still monitor drive
settings and fault information even if the main circuit has no
power.
PC tool for drive setup and parameter management
PC tool for enhanced programming of the drive
Connects to a PROFIBUS-DP network.
Connects to a CC-Link network
Connects to a DeviceNet network
Connects to a CANopen network
Connects to a MECHATROLINK-II network