YASKAWA E1000 Technical Manual page 146

5.2 b: Application
■
PI Setpoint Input Methods
The PI setpoint input depends on the PI function setting in parameter b5-01.
If parameter b5-01 is set to 1, the frequency reference in b1-01 (or b1-15) or one of the inputs listed in
the PI setpoint.
If b5-01 is set to 3, then the PI setpoint can be input from one of the sources listed in
PI Setpoint Source
Analog Input A1
Analog Input A2
Analog Input A3
MEMOBUS/Modbus Register 0006H
Pulse Input RP
Parameter b5-19
Note: A duplicate allocation of the PI setpoint input will result in an oPE alarm.
■
PI Feedback Input Methods
Either one feedback signal can be input for normal PI control, or two feedback signals can be input for controlling a
differential process value.
Normal PI Feedback
The PI feedback signal can be input from one of the sources listed below.
PI Feedback Source
Analog Input A1
Analog Input A2
Analog Input A3
Pulse Input RP
Note: A duplicate allocation of the PI feedback input will result in an oPE alarm.
Differential Feedback
The second PI feedback signal for differential feedback can come from the sources listed below. The differential
feedback function is automatically enabled when a differential feedback input is assigned.
PI Differential Feedback Source
Analog Input A1
Analog Input A2
Analog Input A3
Note: A duplicate allocation of the PI differential feedback input will result in an oPE alarm.
146
Table 5.8 PI Setpoint Sources
Set H3-02 = C
Set H3-10 = C
Set H3-06 = C
Set bit 1 in register 000FH to 1 and input the setpoint to register 0006H
Set H6-01 = 2
Set parameter b5-18 = 1 and input the PI setpoint to b5-19
Table 5.9 PI Feedback Sources
Set H3-02 = B
Set H3-10 = B
Set H3-06 = B
Set H6-01 = 1
Table 5.10 PI Differential Feedback Sources
Set H3-02 = 16
Set H3-10 = 16
Set H3-06 = 16
YASKAWA ELECTRIC SIEP C710616 35D YASKAWA AC Drive E1000 Technical Manual
Table 5.8.
Settings
Settings
Settings
Table 5.8 becomes