Toshiba e-STUDIO555 Service Manual page 250

Note:
When installing the top cover, make sure that
the latches insert completely, the cover does
not catch in the urethane seal and the
urethane sheets are overlapped correctly.
[E] Doctor blade
(1) Take out the developer material.
( P.11-17 "[D] Developer material")
(2) Remove 2 screws and take off the doctor
blade.
Note:
When installing the doctor blade, butt both
edges to the protrusion on the front and rear
side frame and tighten the screw. (The
doctor sleeve gap does not need to be
adjusted.)
e-STUDIO555/655/755/855
DEVELOPER UNIT
Doctor blade
Screw
Doctor blade
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
11 - 18
Urethane seal ( outside )
Urethane seal
( inside )
Urethane seal
Fig. 11-26
Screw
Fig. 11-27
Protrusion
Fig. 11-28