Toshiba e-STUDIO555 Service Manual page 195

(4) Slide the registration roller to the front side,
then take off the rear side to remove it.
(5) Take off 2 bushings, gear and pin.
[G-2] Registration sensor (S18)
(1) Remove 1 screw and take off the sensor with
the bracket.
(2) Disconnect 1 connector, release the latch
and take off the sensor.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Registration roller ( rubber )
Fig. 8-59
Bushing
Pin
Gear
Fig. 8-60
Registration sensor
Fig. 8-61
8 - 33
Bushing
e-STUDIO555/655/755/855
PAPER FEEDING SYSTEM
8