Toshiba e-STUDIO555 Service Manual page 123

[E] LCD panel (LCD) / Touch panel (TCP)
(1) Take off the control panel unit.
P.5-12 "[A] Control panel unit"
(2) Remove the DSP board.
P.5-14 "[C] DSP board (DSP)"
(3) Remove 1 screw and take off the harness
clamp.
(4) Remove 2 screws and take off the LCD.
(5) Take off the touch panel.
Notes:
1. When installing the touch panel, be sure
that the panel faces the right direction.
2. Be sure that no dust or stain is on the
LCD panel or the touch panel before the
installation.
[F] Control panel cover
(1) Release the 4 latches, and take off the
control panel cover.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Fig. 5-22
Touch panel
Fig. 5-23
Latch
Fig. 5-24
5 - 17
LCD
Control panel cover
Latch
e-STUDIO555/655/755/855
CONTROL PANEL
5