Read Motor (Mr2) - Toshiba e-STUDIO555 Service Manual

(3) Remove1 E-ring and 1 bushing.
(4) Disconnect 1 connector.
(5) Remove 3 screws and take off the original
feed motor bracket with the motor.
Note:
When installing the original feed motor
bracket, refix the loosened screw and tighten
the belt tension.

15.5.26 Read motor (MR2)

(1) Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(2) Loosen 1 screw.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Bushing
Fig. 15-87
Fig. 15-88
Fig. 15-89
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
15 - 39
E-ring
Connector
e-STUDIO555/655/755/855
15