Toshiba e-STUDIO555 Service Manual page 317

[I] Reverse motor [M19]
(1) Take off the reverse section driving unit
( P.14-12 "[H] Reverse section driving unit
/ Reverse motor driving PC board (MOT2-RV
board)").
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse motor.
[J] Reverse roller-1 / Reverse roller-2
(1) Take off the reverse section driving unit
( P.14-12 "[H] Reverse section driving unit
/ Reverse motor driving PC board (MOT2-RV
board)").
(2) Take off the reverse motor
( P.14-13 "[I] Reverse motor [M19]").
(3) Remove 2 E-rings, 2 gears and 2 belts.
(4) Remove 2 E-rings and 2 bearings to take off
the reverse roller-1.
(5) Remove 2 E-rings and 2 bearings to take off
the reverse roller-2.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Reverse motor
Fig. 14-20
Belt
Gear
Fig. 14-21
Reverse roller-2
Bearing
Fig. 14-22
14 - 13
Belt
Gear
Reverse roller-1
Bearing
e-STUDIO555/655/755/855
EXIT/REVERSE SECTION
14