Toshiba e-STUDIO555 Service Manual page 201

(2) Disconnect the connector for each sensor,
and take off the sensor.
[J-6] Tandem LCF tray-up motor (M41)
(1) Take off the switching regulator.
( SERVICE HANDBOOK "[E] Switching
regulator (PS)")
(2) Disconnect 1 connector, remove 3 screws
and take off the Tandem LCF tray-up motor.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
End fence
stop position sensor
Standby side empty sensor
Fig. 8-76
Tandem LCF tray-up motor
Fig. 8-77
8 - 39
End fence
home position sensor
Screw
Screw
e-STUDIO555/655/755/855
PAPER FEEDING SYSTEM
8