Toshiba e-STUDIO555 Service Manual page 181

(3) Remove 1 clip to take off the feed roller.
(4) Remove 1 clip to take off the separation
roller.
[A-2] Drawer empty sensor (S31/S37/ S43/ S49)
(1) Disconnect 1 connector to take off the
drawer empty sensor.
[A-3] Tray-up sensor (S32/S38/S44/S50)
(1) Disconnect 1 connector.
(2) Pull the lever and take off the tray-up sensor
while the pickup roller is lowered.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Separation roller
Fig. 8-18
Drawer empty sensor
Fig. 8-19
Fig. 8-20
8 - 19
Feed roller
Tray-up sensor
e-STUDIO555/655/755/855
PAPER FEEDING SYSTEM
8