Toshiba e-STUDIO555 Service Manual page 99

7. Paper exit
→ The exit sensor (S22) detects the trailing edge of the paper.
→ The equipment enters the toner supply operation when developer material toner density is lower
than the preset value.
→ The main charger, developer bias and discharge LED (ERS) are turned OFF.
→ The drum, transfer belt, fuser unit and developer unit stop. Each fan returns to the ready rotation.
→ The feed motor (M20) is turned OFF.
→ The rotation speed of the polygonal motor (M2) switches from a high speed to a low speed.
(e-STUDIO555/655)
→ "READY" appears and the equipment enters the ready state.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
4 - 3
e-STUDIO555/655/755/855
GENERAL OPERATION
4