Toshiba e-STUDIO555 Service Manual page 298

(4) Remove 2 screws and take off the stay.
(5) Disconnect each connector, remove each
screw and take off the thermistor and
thermostat.
Notes:
1. When installing the thermostats, be
careful not to deform the thermostats and
their brackets.
2. Adjust the gap between each thermostat
and the fuser roller to be 2.0-2.5 mm.
e-STUDIO555/655/755/855
FUSER UNIT
Screw
Thermistor Thermostat
Screw
2.0~2.5mm 2.0~2.5mm
Heat roller
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
13 - 24
Stay Screw
Fig. 13-31
Thermistor
Screw
Screw
Fig. 13-32
Thermostat
Fig. 13-33