[G] Lens unit
(1)
Take off the lens cover
(
P.6-14 "[B] Lens cover"]).
Disconnect 1 connector, remove 4 screws
and remove 2 washers to take out the lens
unit.
Notes:
1. When replacing the lens unit, do not
touch 10 screws denoted with arrows in
the figure.
2. Handle the unit with extra care. Do not
touch the adjusted area or lens.
e-STUDIO555/655/755/855
SCANNING SECTION
Lens unit
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
6 - 18
Fig. 6-29
Fig. 6-30
Fig. 6-31