Toshiba e-STUDIO555 Service Manual page 297

(5) Remove the spring to take off the upper
separation fingers.
[F] Lower separation finger unit / Lower separation finger
(1) Take off the fuser unit
( P.13-17 "[B] Fuser unit").
(2) Remove 2 screws and open the lower
separation finger unit.
(3) Remove the spring to take off the lower
separation fingers.
[G] Fuser roller front/center/rear thermistor (THM1 / THM 2 / THM 3), Fuser roller center/side
thermostat (THMO1 / THMO2)
(1) Take off the fuser unit
( P.13-17 "[B] Fuser unit").
(2) Take off the cleaning web unit
( P.13-18 "[C] Cleaning web unit /
Cleaning web").
(3) Loosen 2 pressure screws completely.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Spring
Upper separation finger
Fig. 13-28
Lower separation finger
Fig. 13-29
Pressure screw
Fig. 13-30
13 - 23
Spring
e-STUDIO555/655/755/855
FUSER UNIT
13