(6)
Take off 2 fingers and then the rear terminal
cover.
(7)
Pull up the terminal, remove the spring and
release the hook on the rear side to take off
the charger wire.
(8)
Remove 1 screw and take off the cleaning
pad.
e-STUDIO555/655/755/855
PROCESS RELATED SECTION
Latch
Charger wire
Screw
Cleaning pad
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
9 - 10
Terminal cover
Fig. 9-9
Terminal
Spring
Fig. 9-10
Fig. 9-11