Toshiba e-STUDIO555 Service Manual page 314

[C] Exit sensor [S22]
(1) Take off the left lower cover (= exit cover)
( P.2-44 "[J] Left lower cover (Exit cover)").
(2) Disconnect 1 connector, remove 1 screw and
then take off the sensor with its bracket.
(3) Release the latch to take off the exit sensor.
[D] Reverse sensor-1 [S23] / Reverse sensor-2 [S24]
(1) Take off the left lower cover (= exit cover)
( P.2-44 "[J] Left lower cover (Exit cover)").
(2) Disconnect 1 connector, remove 2 screws
and then take off the reverse sensor-1.
(3) Disconnect 1 connector, remove 1 screw and
then take off the reverse sensor-2.
e-STUDIO555/655/755/855
EXIT/REVERSE SECTION
Exit sensor
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
14 - 10
Fig. 14-11
Exit sensor
Fig. 14-12
Reverse sensor-1
Reverse sensor-2
Fig. 14-13