Toshiba e-STUDIO555 Service Manual page 227

[C] Cleaning blade
(1) Take off the drum.
( P.10-7 "[B] Drum thermistor (THM5) and
Drum")
(2) Remove 4 screws to take off the cleaner top
cover.
(3) Remove 1 screw to take off the cleaning
blade by holding both sides of the plate.
Note:
Do not touch the edge of the cleaning blade.
[D] Recovery blade
(1) Take off the cleaning blade.
( P.10-9 "[C] Cleaning blade")
(2) Separate the recovery blade gently.
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
Screw
Fig. 10-12
Cleaning blade
Fig. 10-13
Recovery blade
Fig. 10-14
10 - 9
Cleaner top cover
Screw
Screw
e-STUDIO555/655/755/855
DRUM/CLEANER UNIT
10