Radf Cooling Fan (Fr1) - Toshiba e-STUDIO555 Service Manual

(4) Remove 2 screws and take off the bracket
from the original exit motor.

15.5.30 RADF cooling fan (FR1)

(1) Take off the RADF rear cover.
P.15-16 "15.5.3 RADF rear cover"
(2) Disconnect 1 connector.
(3) Remove 2 screws and take off the RADF
cooling fan with the bracket.
(4) Remove 2 screws and take off the bracket
from the RADF cooling fan.
e-STUDIO555/655/755/855
REVERSING AUTOMATIC DOCUMENT FEEDER (RADF)
Connector
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
15 - 42
Fig. 15-96
Fig. 15-97
Fig. 15-98