Toshiba e-STUDIO555 Service Manual page 258

(3) Disconnect 2 connectors, remove 1 screw
and then take off the developer unit detection
switch.
[N] Toner filter unit / Developer unit fan (M31)
(1) Take off the right rear cover.
( P.2-43 "[H] Right rear cover")
(2) Pull out the toner filter.
(3) Remove 2 screws to pull out the filter duct.
(4) Disconnect 1 connector of the fan.
(5) Remove 3 screws to take off the fan.
e-STUDIO555/655/755/855
DEVELOPER UNIT
Screw
Developer unit detection switch
Toner filter
Developer unit fan
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
11 - 26
Connector
Fig. 11-50
Filter duct
Fig. 11-51
Fig. 11-52