Toshiba e-STUDIO555 Service Manual page 194

[G] Registration roller unit
(1) Take off the cleaner unit.
(2) Remove 1 screw and take off the fixing
bracket.
(3) Open the right center cover and disconnect 1
connector.
(4) Pull out the registration roller unit toward the
front side while tilting it.
[G-1] Registration roller (rubber)
(1) Remove 2 screws and take off the paper
guide.
(2) Remove 1 screw and take off the plate
spring.
(3) Remove 1 clip and 2 springs.
e-STUDIO555/655/755/855
PAPER FEEDING SYSTEM
Registration roller unit
Fixing bracket
Plate spring
Spring
© 2009 - 2011 TOSHIBA TEC CORPORATION All rights reserved
8 - 32
Fig. 8-56
Paper guide
Fig. 8-57
Clip
Fig. 8-58